Tap Replacement in Eatons Hill
Homes here carry tapware from the 1970s right through to the 2000s, so worn-out mixers keep tap replacement in Eatons Hill on our regular runs. We cover Eatons Hill and the suburbs around it.
If we're late, $100 comes off your bill
- Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
- Fixed Quote FirstFlat-rate pricing, agreed before any work starts
- Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
- $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
Swapping a tap is licensed plumbing work in Queensland, and every job is done by a licensed plumber working under QBCC No: 15024607.
Mixer Taps and Separate Taps Compared
A mixer runs hot and cold to a single spout under one lever; separate taps give each supply its own outlet. Which style suits comes down to what the old fitting leaves behind.
A replacement has to match three things before anything gets ordered:
- how many holes the sink or basin has, and their width
- whether the new fitting sits on the bench or hangs off the wall
- the supply pipes and flexes under it
A wall unit feeds from pipework buried in the wall, so moving between wall and bench mounting means opening the wall or changing the basin, not just the fitting.
Isolation valves matter too. Each supply line can carry one, closing off a single tap instead of the whole house, which simplifies the swap and any later work.
WaterMark and WELS on a New Tap
WaterMark certification is the proof a plumbing product meets the safety and fit-for-purpose requirements of Australia's Plumbing Code. WELS (Water Efficiency Labelling and Standards) is the registration scheme that gives a tap its star rating plus water-use details.
Both marks are needed before we may lawfully fit the product, and the tap should display them. Buying online adds one more check, because the listing has to show:
- the WaterMark licence number and the product specification
- the WELS registration number or model name, with stars and water use
Each scheme runs a searchable database, so a model-name search settles it before you pay. If anything's missing, the seller should supply it before you commit.
On ratings, Business Queensland sets a 3-star floor for tapware and states the rule does not apply to renovations.
Who May Replace a Tap in Queensland
Tap replacement belongs to licensed plumbers: the QBCC's own householder guide lists this job outside the small set a home owner may do without a licence. The one exception the QBCC leaves open is the jumper valve or washer inside a tap, though the finished work still has to meet the standard.
The paperwork then splits by the job:
Matching the old fitting, same position
minor work. A licensee handles it, no permit, no Form 4.
A tap going somewhere new
notifiable work. No council approval applies, and the plumber has 10 business days to lodge the Form 4 with the QBCC.
One property type changes that. Where a building shares a drain with another, or runs a dual reticulated water supply, adding a fixture is permit work, applied for through the council first.
Rentals add a layer. A tenant needs signed permission from the owner or manager, on a Form 23, before attaching any fixture. Fitted without it, the fixture leaves the owner or manager three choices: raise the breach and seek resolution, keep the work as an improvement, or remove the fitting and recover the costs from the tenant.
The 9 Litres per Minute Rental Tap Rule
Queensland's tenancy rules cap cold taps inside the home, single-lever mixers included, at 9 litres per minute before the owner can charge a tenant for the full water account. That flow rate is the test for passing the whole usage charge on.
The cap is narrower than it sounds. It covers taps above a hand basin, kitchen sink or laundry trough. Bath taps, garden taps and taps feeding appliances like dishwashers and washing machines stay outside it.
For fixtures made from 2005 on, look for a WELS rating of 3 stars or higher. The Residential Tenancies Authority advises keeping the evidence on file: plumbing reports or compliance papers, receipts, packaging, warranties and manuals.
Like for Like or a New Tap Position
Five things drive the price of a tap replacement. The tap type comes first. Then come the isolation valves and supply joins, the fit of the holes, access under the bench, and how many taps you do at once.
Putting the tap somewhere new adds the Form 4 lodgement fee, paid by the contractor and often passed to the owner. The fixed quote settles the figure before any work starts.
Why Homes Here Upgrade the Tapware
Most tap swaps here are owner choices, not landlord stopgaps. At the last census, 28.3 per cent of local dwellings were owned outright and another 60.3 per cent were mortgaged. So the person choosing the new mixer is usually the person living with it.
The housing stock runs from the 1970s estates near the hill to the streets around Marylin Terrace that filled in through the 1990s. Our quotes cover two-handle bathroom pairs and bench mixers on their second cartridge alike.
A worn mixer that keeps dripping is a repair, and our tap repairs page walks through that call. A tap past its third cartridge, or one you want gone for good, is a replacement. Cisterns and pans sit with our toilet repairs work, and the full tap and toilet plumbing list rounds out the jobs we do.
How We Replace a Tap
- 1
Describe the problem
Phone (07) 3523 7121 or fill in the form with what you're seeing in Eatons Hill. The more we know, the better we can prepare.
- 2
We fit and test the new tap
We shut the isolation valves, take out the old fitting and mount the new tap in the existing holes or its new position. Supplies go on, water runs, and every join gets a leak check before we leave.
- 3
Agree on the price
A fixed quote comes before any work starts: flat-rate pricing, no hidden fees, and your go-ahead first.
- 4
Pay on completion
Card or EFTPOS on site when everything's working, or ask us about Fix now, pay later.
Plumbing job in Eatons Hill?
$0 call-out fees, available 24/7, and same-day where we can.
Tap Replacement Questions From Eatons Hill
Call (07) 3523 7121Can I buy my own tap and have you fit it?
Yes, provided the tap shows the WaterMark mark and a WELS label with its stars and water use. That certification is what lets a licensed plumber install the product legally in Australia.
How much does it cost to replace a tap in Eatons Hill?
The price depends most on the tap type, and on whether the isolation valves and connections can serve again. We price by flat rate, and a fixed quote before any work starts confirms the figure for your job.
Does a tap replacement in Eatons Hill need a permit or Form 4?
An exact swap in the existing position counts as minor work, needing no permit and skipping the Form 4. A tap in a fresh spot is notifiable: no permit, but the plumber reports it to the QBCC on a Form 4. Where the property sits on a shared combined drain or a dual reticulated supply, a council permit comes first.
What is the tap flow limit for rentals?
The limit is 9 litres per minute on internal cold water taps and single mixer taps before an owner can pass the full usage charge to the tenant. It applies to taps over a hand basin, kitchen sink or laundry trough; bath, garden and appliance taps are excluded.
Do taps in Queensland homes need a minimum WELS rating?
Yes, every tap sold in Australia carries WELS registration with its stars and water use shown. The 3-star minimum Business Queensland sets for tapware is a building rule, and the agency states it stays clear of renovations.
Call Us About the New TapWe'll call you back.
Phone (07) 3523 7121 for a licensed plumber in Eatons Hill. We work under QBCC No: 15024607, with flat-rate pricing, no hidden fees and same-day where we can.
To claim your $0 call-out fee, call (07) 3523 7121 today.